Kdjykuj

When I try to set root's password:

root@OpenWrt:~# passwd

Changing password for root

Enter the new password (minimum of 5, maximum of 8 characters)

Please use a combination of upper and lower case letters and numbers.

It seems the maximum length is 8. If I try to set a password longer than 8, only the first 8 characters are valid. How can I set a longer password for root?

My OpenWrt version:

Linux OpenWrt 4.14.108 #0 SMP Wed Mar 27 21:59:03 2019 x86_64 GNU/Linux

This is because DES-based crypt (AKA 'descrypt') truncates passwords at 8 bytes, and only checks the first 8 for the purpose of password verification.

That's the answer to your direct question, but here's some general advice implied by your context:

• Fortunately, from my reading, MD5 in /etc/login.defs is actually md5crypt ($1$), which, while a little outdated and declared deprecated by its author, is still far superior to DES-based crypt (and definitely much better than a raw, unsalted hash like plain MD5! Most unsalted hashes can be cracked on commodity GPUs at rates of billions per second)




• It looks like SHA256 (actually sha256crypt) and SHA512 (actually sha512crypt) are also there. I would pick one of those instead.




• If you set your password to password or something under each scheme, you can visually verify whether or not my conclusion that they're the -crypt variants is correct (examples here are taken from the hashcat example hashes, all 'hashcat', some wrapped for readability):

Not recommended - unsalted or legacy hash types, much too "fast" (cracking rates) for password storage:

MD5         - 8743b52063cd84097a65d1633f5c74f5

SHA256      - 127e6fbfe24a750e72930c220a8e138275656b8e5d8f48a98c3c92df2caba935

SHA512      - 82a9dda829eb7f8ffe9fbe49e45d47d2dad9664fbb7adf72492e3c81ebd3e2 

              9134d9bc12212bf83c6840f10e8246b9db54a4859b7ccd0123d86e5872c1e5082f

descrypt    - 48c/R8JAv757A

OK - much better than unsalted, no truncation, but no longer sufficiently resistant to brute force on modern hardware:

md5crypt    - $1$28772684$iEwNOgGugqO9.bIz5sk8k/

Better - relatively modern hashes with large salts and work factors:

sha256crypt - $5$rounds=5000$GX7BopJZJxPc/KEK$le16UF8I2Anb.rOrn22AUPWvzUETDGefUmAV8AZkGcD

sha512crypt - $6$52450745$k5ka2p8bFuSmoVT1tzOyyuaREkkKBcCNqoDKzYiJL9RaE8yMnPgh2XzzF0NDrUhgrcLwg78xs1w5pJiypEdFX/

Of these, only descrypt truncates at 8. The last two are your best bet.

Note also that I'm only listing the hash types that are supported by /etc/login.defs on this platform. For general use, even sha256crypt and sha512crypt have been superseded - first by bcrypt, and then later by truly parallel-attack-resistant hashes like scrypt and the Argon2 family. (Note, however, that for interactive logins that should complete in under one second, bcrypt is actually more resistant to attack than the latter)

I modified this in /etc/login.defs:

PASS_MAX_LEN            8

problem fixed.

Important additions:

After I changed the above parameters, although I can set a password larger than 8 digits, it is still invalid because the real password is only the first eight digits. I don't know if this is my problem.

My final solution is to set

# ENCRYPT_METHOD DES

to

ENCRYPT_METHOD MD5

in /etc/login.defs.

Now, I can finally set a root password that is really larger than eight.