Kdjykuj

In my final project for my Python course, I am required to create a calculator program. I really need someone to look over my code and tell me if I have met all the requirements for this project.

Here are the requirements:

For the final project, you are to write a calculator program in Python
with the following characteristics:

• It must be at least 50 lines of code excluding comments


• It must have the following functions:+,-,*,/, SQRT, and work with decimal numbers.


• It must be all text, no high resolution graphics


• It must automatically copy the result to the operating system clipboard


• It must work as a functional calculator (calculations can be entered over and over)

Please submit the source code only (.py), no object code (I will
compile on receipt)

NOTE:

1. This assignment is graded on a pass/fail basis; there is no partial credit or resubmissions. Be sure you understand ALL of the
   requirements.




2. Solutions that require the user install any software will NOT be accepted (in case you are not sure, this means NO Pyperclip.)

WARNING: All submissions will be checked for plagiarism using
SafeAssign or other plagiarism checker.

I completed the project, but because this is a pass/fail project I want to be 200% sure I have met every requirement. I am also open to any other feedback that would sharpen my Python skills.

Menu

def main():

    #Menu

    print("=======================")

    print("Welcome to Calculator")

    print("By: Tyler Harris")

    print("=======================")

    print("Menu: ")

    print("[1] Calculator")

    print("[2] Instructions")

    print("[3] Exit")

    print("=======================")

    choice = input("Please select an option: ")

    if choice == '1':

        calculator()

    elif choice == '2':

        instructions()

        main()

    elif choice == '3':

        print("Thank you for using Calculator.")

    else:

        print("Not an option, try again:")

        main()

Calculator

def calculator():

    result=0        #Resets calulator.

    try:

        while True:

            print("Last Result: "+str(result))



            #Number 1 input.

            if result == 0:

                num1= int(input("First Number: "))

            if result != 0:     

                num1=result



            #Operator input.

            #Checks for input of special operators 'c', 'sqrt', and 'esc'.

            operator=input("Opertaor: ").lower()

            if operator == "c":

                print("Calculator cleared")

                calculator()

            if operator=="sqrt":

                result=(sqrt(num1))

                print("Result: "+str(result))

                continue

            if operator=="esc":

                main()

            if operator.isdigit():      #Throw error if operator is a number.

                raise Exception()



            #Number 2 input.    

            num2= int(input("Second Number: "))

            #Operator calls.

            if operator=="+":

                result=(add(num1,num2))

            elif operator=="-":

                result=(sub(num1,num2))

            elif operator=="*":

                result=(mult(num1,num2))

            elif operator=="/":

                result=(div(num1,num2))





            #Copy result to System's clipboard and display the result.    

            copy2clip(str(result))      

            print("=======================")

            print("Result: "+str(result))

            print("copied to clipboard")

            print("=======================")



    #Catch any errors and reset calculator            

    except Exception:

        print("=======================")

        print("Error Please try again.")

        calculator()

    else:

        calculator()

Operators

def add(num1,num2):

    return num1 + num2

def sub(num1,num2):

    return num1 - num2

def mult(num1,num2):

    return num1 * num2

def div(num1,num2):

    return num1 / num2

def sqrt(num1):

    return (num1**(1/2.0))

Instructions

def instructions():

    print("=======================")

    print(format('Calculator','^25s'))

    print("=======================")

    print("Available operators")

    print("+: Addition")

    print("-: Subtraction")

    print("*: Multiplication")

    print("/: Division")

    print("sqrt: Square Root")

    print("c: Clear Calculator")

    print("esc: Exit Calculator")

    print("=======================")



def copy2clip(txt):

    cmd='echo '+txt.strip()+'|clip'

    return subprocess.check_call(cmd, shell=True)



if __name__=='__main__':

    main()

You are using function calls as if they were goto labels. That is a huge sin: it makes your program spaghetti code. If you want a loop, then write a loop. For example, main() should look like:

def main():

    while True:

        #Menu

        print("=======================")

        print("Welcome to Calculator")

        print("By: Tyler Harris")

        print("=======================")

        print("Menu: ")

        print("[1] Calculator")

        print("[2] Instructions")

        print("[3] Exit")

        print("=======================")

        choice = input("Please select an option: ")

        if choice == '1':

            calculator()

        elif choice == '2':

            instructions()

        elif choice == '3':

            print("Thank you for using Calculator.")

            break

        else:

            print("Not an option, try again:")

    elif choice == '2':

        instructions()

        main()

Ummm, that's probably not exactly what you want.
Python lacks a goto statement, so the usual idiom would be to wrap the whole thing in some sort of while loop, perhaps while True.
Consider an input sequence of "2 2 2 2 2", or "z z z z z".
You'll wind up pushing main onto the call stack again, and again, and again....

            print("Last Result: "+str(result))

Usual idiom would be print('Last Result:', result), but no harm done.

                num1 = int(input("First Number: "))

The requirements seemed pretty clear about "...must work with decimal numbers."
You chose to invoke int() rather than float().

            if result != 0:     

                num1 = result

I can't imagine how that corresponds to The Right Thing.
If you want a sentinel, None would be much better than 0,
just consider a sequence like 2 + 1 = - 3 = (which yields zero).
Perhaps there's a reason for assigning the accumulator to num1, but I'm not seeing it.
It appears you have discarded the user input.

            operator = input("Opertaor: ").lower()

Typo.

                calculator()

Same criticism as above. Python lacks goto, and you're leaking stack frames here.

            if operator == "sqrt":

                result = (sqrt(num1))

                print("Result: "+str(result))

                continue

It is apparent that I'm not understanding why you are using the result accumulator versus the num1 user input.
On most calculators, repeated clicking of the √ key would yield repeated assignment of result = sqrt(result).
I'm a little concerned about num1 versus result confusion.

            if operator=="esc":

                main()

Same remark about leaking stack frames.
A return statement would be usual, here.

            if operator.isdigit(): 

This seems a bit restrictive.
Better to unconditionally raise an "unrecognized operator" error.

            num2 = int(input("Second Number: "))

Same criticism as above, the "decimal" instructions are pretty clear about calling float().

                result = (add(num1,num2))

All four of these assignments seem pretty weird,
as for a typical calculator we'd be accumulating result = add(result, num2).
This is a consequence of the num1 assignment above.
Also, please discard the (extraneous parentheses).

def sqrt(num1):

    return (num1**(1/2.0))

This works fine, but do consider the usual idiom of simply calling math.sqrt().