What is the domain in a tikz parametric plot?
I don't understand what's going on here. If the domain of the parametric parameter t is 0:100, then the function sin(2pi*t) should oscillate about 100 times, but it only oscillates a couple. What am I missing?
documentclass{article}
usepackage{tikz}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=40, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t)*.5+.5});
end{scope}
end{tikzpicture}
end{document}
tikz-pgf plot domain
asked 4 hours ago
argentum2fargentum2f
1336
add a comment |
I don't understand what's going on here. If the domain of the parametric parameter t is 0:100, then the function sin(2pi*t) should oscillate about 100 times, but it only oscillates a couple. What am I missing?
documentclass{article}
usepackage{tikz}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=40, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t)*.5+.5});
end{scope}
end{tikzpicture}
end{document}
tikz-pgf plot domain
asked 4 hours ago
argentum2fargentum2f
1336
add a comment |
I don't understand what's going on here. If the domain of the parametric parameter t is 0:100, then the function sin(2pi*t) should oscillate about 100 times, but it only oscillates a couple. What am I missing?
documentclass{article}
usepackage{tikz}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=40, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t)*.5+.5});
end{scope}
end{tikzpicture}
end{document}
tikz-pgf plot domain
asked 4 hours ago
argentum2fargentum2f
1336
I don't understand what's going on here. If the domain of the parametric parameter t is 0:100, then the function sin(2pi*t) should oscillate about 100 times, but it only oscillates a couple. What am I missing?
documentclass{article}
usepackage{tikz}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=40, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t)*.5+.5});
end{scope}
end{tikzpicture}
end{document}
tikz-pgf plot domain
tikz-pgf plot domain
asked 4 hours ago
argentum2fargentum2f
1336
asked 4 hours ago
argentum2fargentum2f
1336
asked 4 hours ago
argentum2fargentum2f
1336
asked 4 hours ago
argentum2fargentum2f
1336
asked 4 hours ago
argentum2fargentum2f
1336
1336
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
You got the domain right. The problem is that the trigonometric functions in TikZ are (oddly, in my opinion) in degrees by default. So 2*pi*t with t between 0 and 100 will give you the sine function (in degrees) between 0 and 628.3 degrees (which is about 10.96 radians) which almost 1.75 periods of the function. This is exactly what you see there: one full period and 3/4 of another.
You can tell TikZ to use radians by appending an r to the argument or using the rad function (see page 1005 of the TikZ-PGF manual, section 93.3.4 “Trigonometric functions”). I also added the FPU to allow the domain up to 100 and increased the number of samples to 400 following Kpym's suggestion (notice the aliasing):
documentclass{article}
usepackage{tikz}
usetikzlibrary{fpu}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
pgfkeys{/pgf/fpu=true,/pgf/fpu/output format=fixed}
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=400, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t r)*.5+.5});
end{scope}% ^
end{tikzpicture}
end{document}
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
1
withsamples=400,smoothit looks better, but this is not the question ;)
– Kpym
4 hours ago
@Kpym Certainly! I just removed thesmoothto show that 100 cycles with 40 samples won't do (unless OP wants to show the aliasing). Thanks anyway :)
– Phelype Oleinik
3 hours ago
Doh! Degrees... Yeah, don't know why that didn't occur to me. I'm just so used to thinking in radians. Usually trigonometric functions are defined assuming radians, but I guess it makes sense since everywhere else in latex assumes angles are degrees. I actually did try and turn up the samples at first - thought it was just aliasing.
– argentum2f
2 hours ago
@argentum2f Yes, as I said “oddly”. All programming languages I know (which aren't that many, but...) have asinfunction for argument radians andsindfunction for argument in degrees. Anyhow, Till must have had his reasons :)
– Phelype Oleinik
2 hours ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f479719%2fwhat-is-the-domain-in-a-tikz-parametric-plot%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
You got the domain right. The problem is that the trigonometric functions in TikZ are (oddly, in my opinion) in degrees by default. So 2*pi*t with t between 0 and 100 will give you the sine function (in degrees) between 0 and 628.3 degrees (which is about 10.96 radians) which almost 1.75 periods of the function. This is exactly what you see there: one full period and 3/4 of another.
You can tell TikZ to use radians by appending an r to the argument or using the rad function (see page 1005 of the TikZ-PGF manual, section 93.3.4 “Trigonometric functions”). I also added the FPU to allow the domain up to 100 and increased the number of samples to 400 following Kpym's suggestion (notice the aliasing):
documentclass{article}
usepackage{tikz}
usetikzlibrary{fpu}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
pgfkeys{/pgf/fpu=true,/pgf/fpu/output format=fixed}
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=400, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t r)*.5+.5});
end{scope}% ^
end{tikzpicture}
end{document}
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
1
withsamples=400,smoothit looks better, but this is not the question ;)
– Kpym
4 hours ago
@Kpym Certainly! I just removed thesmoothto show that 100 cycles with 40 samples won't do (unless OP wants to show the aliasing). Thanks anyway :)
– Phelype Oleinik
3 hours ago
Doh! Degrees... Yeah, don't know why that didn't occur to me. I'm just so used to thinking in radians. Usually trigonometric functions are defined assuming radians, but I guess it makes sense since everywhere else in latex assumes angles are degrees. I actually did try and turn up the samples at first - thought it was just aliasing.
– argentum2f
2 hours ago
@argentum2f Yes, as I said “oddly”. All programming languages I know (which aren't that many, but...) have asinfunction for argument radians andsindfunction for argument in degrees. Anyhow, Till must have had his reasons :)
– Phelype Oleinik
2 hours ago
add a comment |
You got the domain right. The problem is that the trigonometric functions in TikZ are (oddly, in my opinion) in degrees by default. So 2*pi*t with t between 0 and 100 will give you the sine function (in degrees) between 0 and 628.3 degrees (which is about 10.96 radians) which almost 1.75 periods of the function. This is exactly what you see there: one full period and 3/4 of another.
You can tell TikZ to use radians by appending an r to the argument or using the rad function (see page 1005 of the TikZ-PGF manual, section 93.3.4 “Trigonometric functions”). I also added the FPU to allow the domain up to 100 and increased the number of samples to 400 following Kpym's suggestion (notice the aliasing):
documentclass{article}
usepackage{tikz}
usetikzlibrary{fpu}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
pgfkeys{/pgf/fpu=true,/pgf/fpu/output format=fixed}
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=400, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t r)*.5+.5});
end{scope}% ^
end{tikzpicture}
end{document}
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
1
withsamples=400,smoothit looks better, but this is not the question ;)
– Kpym
4 hours ago
@Kpym Certainly! I just removed thesmoothto show that 100 cycles with 40 samples won't do (unless OP wants to show the aliasing). Thanks anyway :)
– Phelype Oleinik
3 hours ago
Doh! Degrees... Yeah, don't know why that didn't occur to me. I'm just so used to thinking in radians. Usually trigonometric functions are defined assuming radians, but I guess it makes sense since everywhere else in latex assumes angles are degrees. I actually did try and turn up the samples at first - thought it was just aliasing.
– argentum2f
2 hours ago
@argentum2f Yes, as I said “oddly”. All programming languages I know (which aren't that many, but...) have asinfunction for argument radians andsindfunction for argument in degrees. Anyhow, Till must have had his reasons :)
– Phelype Oleinik
2 hours ago
add a comment |
You got the domain right. The problem is that the trigonometric functions in TikZ are (oddly, in my opinion) in degrees by default. So 2*pi*t with t between 0 and 100 will give you the sine function (in degrees) between 0 and 628.3 degrees (which is about 10.96 radians) which almost 1.75 periods of the function. This is exactly what you see there: one full period and 3/4 of another.
You can tell TikZ to use radians by appending an r to the argument or using the rad function (see page 1005 of the TikZ-PGF manual, section 93.3.4 “Trigonometric functions”). I also added the FPU to allow the domain up to 100 and increased the number of samples to 400 following Kpym's suggestion (notice the aliasing):
documentclass{article}
usepackage{tikz}
usetikzlibrary{fpu}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
pgfkeys{/pgf/fpu=true,/pgf/fpu/output format=fixed}
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=400, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t r)*.5+.5});
end{scope}% ^
end{tikzpicture}
end{document}
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
You got the domain right. The problem is that the trigonometric functions in TikZ are (oddly, in my opinion) in degrees by default. So 2*pi*t with t between 0 and 100 will give you the sine function (in degrees) between 0 and 628.3 degrees (which is about 10.96 radians) which almost 1.75 periods of the function. This is exactly what you see there: one full period and 3/4 of another.
You can tell TikZ to use radians by appending an r to the argument or using the rad function (see page 1005 of the TikZ-PGF manual, section 93.3.4 “Trigonometric functions”). I also added the FPU to allow the domain up to 100 and increased the number of samples to 400 following Kpym's suggestion (notice the aliasing):
documentclass{article}
usepackage{tikz}
usetikzlibrary{fpu}
begin{document}
begin{tikzpicture}
begin{scope}[x=.6textwidth,y=.6textwidth]
pgfkeys{/pgf/fpu=true,/pgf/fpu/output format=fixed}
draw[very thin,color=gray, step=.1] (0.0,0.0) grid (1,1);
draw [ thick, domain=0:100, samples=400, smooth, variable=t]
plot ({t/100}, {sin(2*pi*t r)*.5+.5});
end{scope}% ^
end{tikzpicture}
end{document}
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
edited 3 hours ago
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
answered 4 hours ago
Phelype OleinikPhelype Oleinik
24.2k54688
24.2k54688
1
withsamples=400,smoothit looks better, but this is not the question ;)
– Kpym
4 hours ago
@Kpym Certainly! I just removed thesmoothto show that 100 cycles with 40 samples won't do (unless OP wants to show the aliasing). Thanks anyway :)
– Phelype Oleinik
3 hours ago
Doh! Degrees... Yeah, don't know why that didn't occur to me. I'm just so used to thinking in radians. Usually trigonometric functions are defined assuming radians, but I guess it makes sense since everywhere else in latex assumes angles are degrees. I actually did try and turn up the samples at first - thought it was just aliasing.
– argentum2f
2 hours ago
@argentum2f Yes, as I said “oddly”. All programming languages I know (which aren't that many, but...) have asinfunction for argument radians andsindfunction for argument in degrees. Anyhow, Till must have had his reasons :)
– Phelype Oleinik
2 hours ago
add a comment |
1
withsamples=400,smoothit looks better, but this is not the question ;)
– Kpym
4 hours ago
@Kpym Certainly! I just removed thesmoothto show that 100 cycles with 40 samples won't do (unless OP wants to show the aliasing). Thanks anyway :)
– Phelype Oleinik
3 hours ago
Doh! Degrees... Yeah, don't know why that didn't occur to me. I'm just so used to thinking in radians. Usually trigonometric functions are defined assuming radians, but I guess it makes sense since everywhere else in latex assumes angles are degrees. I actually did try and turn up the samples at first - thought it was just aliasing.
– argentum2f
2 hours ago
@argentum2f Yes, as I said “oddly”. All programming languages I know (which aren't that many, but...) have asinfunction for argument radians andsindfunction for argument in degrees. Anyhow, Till must have had his reasons :)
– Phelype Oleinik
2 hours ago
1
1
with
samples=400,smooth it looks better, but this is not the question ;)– Kpym
4 hours ago
with
samples=400,smooth it looks better, but this is not the question ;)– Kpym
4 hours ago
@Kpym Certainly! I just removed the
smooth to show that 100 cycles with 40 samples won't do (unless OP wants to show the aliasing). Thanks anyway :)– Phelype Oleinik
3 hours ago
@Kpym Certainly! I just removed the
smooth to show that 100 cycles with 40 samples won't do (unless OP wants to show the aliasing). Thanks anyway :)– Phelype Oleinik
3 hours ago
Doh! Degrees... Yeah, don't know why that didn't occur to me. I'm just so used to thinking in radians. Usually trigonometric functions are defined assuming radians, but I guess it makes sense since everywhere else in latex assumes angles are degrees. I actually did try and turn up the samples at first - thought it was just aliasing.
– argentum2f
2 hours ago
Doh! Degrees... Yeah, don't know why that didn't occur to me. I'm just so used to thinking in radians. Usually trigonometric functions are defined assuming radians, but I guess it makes sense since everywhere else in latex assumes angles are degrees. I actually did try and turn up the samples at first - thought it was just aliasing.
– argentum2f
2 hours ago
@argentum2f Yes, as I said “oddly”. All programming languages I know (which aren't that many, but...) have a
sin function for argument radians and sind function for argument in degrees. Anyhow, Till must have had his reasons :)– Phelype Oleinik
2 hours ago
@argentum2f Yes, as I said “oddly”. All programming languages I know (which aren't that many, but...) have a
sin function for argument radians and sind function for argument in degrees. Anyhow, Till must have had his reasons :)– Phelype Oleinik
2 hours ago
add a comment |
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f479719%2fwhat-is-the-domain-in-a-tikz-parametric-plot%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
