RG-213 Cable with electric strained wire as metallic shield of Coaxial cable
$begingroup$
I'm using RG-213 coaxial cable for two-way ham radio communication. But due to weather conditions, the metallic shield of my coaxial cable (RG-213) become rusty and carbonated.
If I use copper electrical cable 3/.029 as metallic shield with aforesaid (rusty metallic shield ) Coaxial Cable, what will be the result? Will it be the best solution for my damage metallic shield coaxial cable or not? Can i get the best two way communication with this method?
coaxial-cable
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
$endgroup$
migrated from electronics.stackexchange.com 7 hours ago
This question came from our site for electronics and electrical engineering professionals, students, and enthusiasts.
add a comment |
$begingroup$
I'm using RG-213 coaxial cable for two-way ham radio communication. But due to weather conditions, the metallic shield of my coaxial cable (RG-213) become rusty and carbonated.
If I use copper electrical cable 3/.029 as metallic shield with aforesaid (rusty metallic shield ) Coaxial Cable, what will be the result? Will it be the best solution for my damage metallic shield coaxial cable or not? Can i get the best two way communication with this method?
coaxial-cable
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
$endgroup$
migrated from electronics.stackexchange.com 7 hours ago
This question came from our site for electronics and electrical engineering professionals, students, and enthusiasts.
1
$begingroup$
Is it possible to cut out the damaged section, put connectors on the ends and join the salvaged cable with a "barrel" connector (e.g., 83-1J)?
$endgroup$
– Brian K1LI
7 hours ago
$begingroup$
What is the maximum frequency that this coax will be used for?
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
$begingroup$
I'm using RG-213 coaxial cable for two-way ham radio communication. But due to weather conditions, the metallic shield of my coaxial cable (RG-213) become rusty and carbonated.
If I use copper electrical cable 3/.029 as metallic shield with aforesaid (rusty metallic shield ) Coaxial Cable, what will be the result? Will it be the best solution for my damage metallic shield coaxial cable or not? Can i get the best two way communication with this method?
coaxial-cable
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
$endgroup$
I'm using RG-213 coaxial cable for two-way ham radio communication. But due to weather conditions, the metallic shield of my coaxial cable (RG-213) become rusty and carbonated.
If I use copper electrical cable 3/.029 as metallic shield with aforesaid (rusty metallic shield ) Coaxial Cable, what will be the result? Will it be the best solution for my damage metallic shield coaxial cable or not? Can i get the best two way communication with this method?
coaxial-cable
coaxial-cable
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
edited 7 hours ago
Kevin Reid AG6YO♦
16.6k33171
16.6k33171
asked 7 hours ago
ajmal nawaz
migrated from electronics.stackexchange.com 7 hours ago
This question came from our site for electronics and electrical engineering professionals, students, and enthusiasts.
migrated from electronics.stackexchange.com 7 hours ago
This question came from our site for electronics and electrical engineering professionals, students, and enthusiasts.
1
$begingroup$
Is it possible to cut out the damaged section, put connectors on the ends and join the salvaged cable with a "barrel" connector (e.g., 83-1J)?
$endgroup$
– Brian K1LI
7 hours ago
$begingroup$
What is the maximum frequency that this coax will be used for?
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
1
$begingroup$
Is it possible to cut out the damaged section, put connectors on the ends and join the salvaged cable with a "barrel" connector (e.g., 83-1J)?
$endgroup$
– Brian K1LI
7 hours ago
$begingroup$
What is the maximum frequency that this coax will be used for?
$endgroup$
– Mike Waters♦
6 hours ago
1
1
$begingroup$
Is it possible to cut out the damaged section, put connectors on the ends and join the salvaged cable with a "barrel" connector (e.g., 83-1J)?
$endgroup$
– Brian K1LI
7 hours ago
$begingroup$
Is it possible to cut out the damaged section, put connectors on the ends and join the salvaged cable with a "barrel" connector (e.g., 83-1J)?
$endgroup$
– Brian K1LI
7 hours ago
$begingroup$
What is the maximum frequency that this coax will be used for?
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
What is the maximum frequency that this coax will be used for?
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter if it does not have high-SWR protection.
Weather-damaged coaxial cable should be replaced with new coaxial cable. Be sure to apply suitable sealing tape (self-amalgamating tape) to the end connectors after tightening them down if they will be exposed to moisture.
The one thing you can do for damaged cable is to cut off the damaged section and install a connector (a proper coaxial connector, not a splice) to join it to a new length. However, this is not a good idea for outdoor installations since it introduces more places for water to get in.
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
$endgroup$
$begingroup$
That impedance bump has a minuscule effect below 50 Mhz, as it's only a tiny fraction of the wavelength.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
@MikeWaters I understood the question as asking about replacing a long length of shield with other wire. We don't know what the length is (I removed "bump" from the answer to improve it), and the question isn't about HF specifically either.
$endgroup$
– Kevin Reid AG6YO♦
6 hours ago
$begingroup$
Yes, he does not specify the frequency of interest (I just asked that), thus my comment.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
I get that now. But what is "electric strained wire"? :-)
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Also, "this is not a good idea for outdoor installations since it introduces more places for water to get in" is generally very good advice indeed. We've had years of practice and experience doing just that, and with great success. Others -especially newbies- have not.
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
$begingroup$
If part or all of the shield of your coax is corroded, then that entire portion of the coaxial cable must be discarded.
The corrosion causes the individual strands of the shield to be isolated from one another, significantly reducing the shielding effect of the braid.
It also causes noise to be heard in your receiver.
And as Kevin correctly stated in another answer here:
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter ...
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "520"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fham.stackexchange.com%2fquestions%2f13195%2frg-213-cable-with-electric-strained-wire-as-metallic-shield-of-coaxial-cable%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter if it does not have high-SWR protection.
Weather-damaged coaxial cable should be replaced with new coaxial cable. Be sure to apply suitable sealing tape (self-amalgamating tape) to the end connectors after tightening them down if they will be exposed to moisture.
The one thing you can do for damaged cable is to cut off the damaged section and install a connector (a proper coaxial connector, not a splice) to join it to a new length. However, this is not a good idea for outdoor installations since it introduces more places for water to get in.
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
$endgroup$
$begingroup$
That impedance bump has a minuscule effect below 50 Mhz, as it's only a tiny fraction of the wavelength.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
@MikeWaters I understood the question as asking about replacing a long length of shield with other wire. We don't know what the length is (I removed "bump" from the answer to improve it), and the question isn't about HF specifically either.
$endgroup$
– Kevin Reid AG6YO♦
6 hours ago
$begingroup$
Yes, he does not specify the frequency of interest (I just asked that), thus my comment.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
I get that now. But what is "electric strained wire"? :-)
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Also, "this is not a good idea for outdoor installations since it introduces more places for water to get in" is generally very good advice indeed. We've had years of practice and experience doing just that, and with great success. Others -especially newbies- have not.
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
$begingroup$
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter if it does not have high-SWR protection.
Weather-damaged coaxial cable should be replaced with new coaxial cable. Be sure to apply suitable sealing tape (self-amalgamating tape) to the end connectors after tightening them down if they will be exposed to moisture.
The one thing you can do for damaged cable is to cut off the damaged section and install a connector (a proper coaxial connector, not a splice) to join it to a new length. However, this is not a good idea for outdoor installations since it introduces more places for water to get in.
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
$endgroup$
$begingroup$
That impedance bump has a minuscule effect below 50 Mhz, as it's only a tiny fraction of the wavelength.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
@MikeWaters I understood the question as asking about replacing a long length of shield with other wire. We don't know what the length is (I removed "bump" from the answer to improve it), and the question isn't about HF specifically either.
$endgroup$
– Kevin Reid AG6YO♦
6 hours ago
$begingroup$
Yes, he does not specify the frequency of interest (I just asked that), thus my comment.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
I get that now. But what is "electric strained wire"? :-)
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Also, "this is not a good idea for outdoor installations since it introduces more places for water to get in" is generally very good advice indeed. We've had years of practice and experience doing just that, and with great success. Others -especially newbies- have not.
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
$begingroup$
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter if it does not have high-SWR protection.
Weather-damaged coaxial cable should be replaced with new coaxial cable. Be sure to apply suitable sealing tape (self-amalgamating tape) to the end connectors after tightening them down if they will be exposed to moisture.
The one thing you can do for damaged cable is to cut off the damaged section and install a connector (a proper coaxial connector, not a splice) to join it to a new length. However, this is not a good idea for outdoor installations since it introduces more places for water to get in.
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
$endgroup$
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter if it does not have high-SWR protection.
Weather-damaged coaxial cable should be replaced with new coaxial cable. Be sure to apply suitable sealing tape (self-amalgamating tape) to the end connectors after tightening them down if they will be exposed to moisture.
The one thing you can do for damaged cable is to cut off the damaged section and install a connector (a proper coaxial connector, not a splice) to join it to a new length. However, this is not a good idea for outdoor installations since it introduces more places for water to get in.
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
edited 6 hours ago
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
answered 7 hours ago
Kevin Reid AG6YO♦Kevin Reid AG6YO
16.6k33171
16.6k33171
$begingroup$
That impedance bump has a minuscule effect below 50 Mhz, as it's only a tiny fraction of the wavelength.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
@MikeWaters I understood the question as asking about replacing a long length of shield with other wire. We don't know what the length is (I removed "bump" from the answer to improve it), and the question isn't about HF specifically either.
$endgroup$
– Kevin Reid AG6YO♦
6 hours ago
$begingroup$
Yes, he does not specify the frequency of interest (I just asked that), thus my comment.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
I get that now. But what is "electric strained wire"? :-)
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Also, "this is not a good idea for outdoor installations since it introduces more places for water to get in" is generally very good advice indeed. We've had years of practice and experience doing just that, and with great success. Others -especially newbies- have not.
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
$begingroup$
That impedance bump has a minuscule effect below 50 Mhz, as it's only a tiny fraction of the wavelength.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
@MikeWaters I understood the question as asking about replacing a long length of shield with other wire. We don't know what the length is (I removed "bump" from the answer to improve it), and the question isn't about HF specifically either.
$endgroup$
– Kevin Reid AG6YO♦
6 hours ago
$begingroup$
Yes, he does not specify the frequency of interest (I just asked that), thus my comment.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
I get that now. But what is "electric strained wire"? :-)
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Also, "this is not a good idea for outdoor installations since it introduces more places for water to get in" is generally very good advice indeed. We've had years of practice and experience doing just that, and with great success. Others -especially newbies- have not.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
That impedance bump has a minuscule effect below 50 Mhz, as it's only a tiny fraction of the wavelength.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
That impedance bump has a minuscule effect below 50 Mhz, as it's only a tiny fraction of the wavelength.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
@MikeWaters I understood the question as asking about replacing a long length of shield with other wire. We don't know what the length is (I removed "bump" from the answer to improve it), and the question isn't about HF specifically either.
$endgroup$
– Kevin Reid AG6YO♦
6 hours ago
$begingroup$
@MikeWaters I understood the question as asking about replacing a long length of shield with other wire. We don't know what the length is (I removed "bump" from the answer to improve it), and the question isn't about HF specifically either.
$endgroup$
– Kevin Reid AG6YO♦
6 hours ago
$begingroup$
Yes, he does not specify the frequency of interest (I just asked that), thus my comment.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Yes, he does not specify the frequency of interest (I just asked that), thus my comment.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
I get that now. But what is "electric strained wire"? :-)
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
I get that now. But what is "electric strained wire"? :-)
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Also, "this is not a good idea for outdoor installations since it introduces more places for water to get in" is generally very good advice indeed. We've had years of practice and experience doing just that, and with great success. Others -especially newbies- have not.
$endgroup$
– Mike Waters♦
6 hours ago
$begingroup$
Also, "this is not a good idea for outdoor installations since it introduces more places for water to get in" is generally very good advice indeed. We've had years of practice and experience doing just that, and with great success. Others -especially newbies- have not.
$endgroup$
– Mike Waters♦
6 hours ago
add a comment |
$begingroup$
If part or all of the shield of your coax is corroded, then that entire portion of the coaxial cable must be discarded.
The corrosion causes the individual strands of the shield to be isolated from one another, significantly reducing the shielding effect of the braid.
It also causes noise to be heard in your receiver.
And as Kevin correctly stated in another answer here:
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter ...
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
$endgroup$
add a comment |
$begingroup$
If part or all of the shield of your coax is corroded, then that entire portion of the coaxial cable must be discarded.
The corrosion causes the individual strands of the shield to be isolated from one another, significantly reducing the shielding effect of the braid.
It also causes noise to be heard in your receiver.
And as Kevin correctly stated in another answer here:
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter ...
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
$endgroup$
add a comment |
$begingroup$
If part or all of the shield of your coax is corroded, then that entire portion of the coaxial cable must be discarded.
The corrosion causes the individual strands of the shield to be isolated from one another, significantly reducing the shielding effect of the braid.
It also causes noise to be heard in your receiver.
And as Kevin correctly stated in another answer here:
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter ...
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
$endgroup$
If part or all of the shield of your coax is corroded, then that entire portion of the coaxial cable must be discarded.
The corrosion causes the individual strands of the shield to be isolated from one another, significantly reducing the shielding effect of the braid.
It also causes noise to be heard in your receiver.
And as Kevin correctly stated in another answer here:
You cannot repair a coaxial cable by wrapping or replacing the outer conductor (shield) with ordinary wire. The shape of the shield is critical to its functioning (determining the characteristic impedance) and the different impedance created by using differently shaped conductors will lead to reduced performance, and possibly damage your transmitter ...
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
edited 6 hours ago
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
answered 6 hours ago
Mike Waters♦Mike Waters
3,6332635
3,6332635
add a comment |
add a comment |
Thanks for contributing an answer to Amateur Radio Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fham.stackexchange.com%2fquestions%2f13195%2frg-213-cable-with-electric-strained-wire-as-metallic-shield-of-coaxial-cable%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
$begingroup$
Is it possible to cut out the damaged section, put connectors on the ends and join the salvaged cable with a "barrel" connector (e.g., 83-1J)?
$endgroup$
– Brian K1LI
7 hours ago
$begingroup$
What is the maximum frequency that this coax will be used for?
$endgroup$
– Mike Waters♦
6 hours ago